Home - Triplate® Shockwave Metalworking Techonologies

Welcome

The vacuum-explosion welded transition joint called Triplate® is a high quality material for welding aluminium to steel.

SMT (Shockwave Metalworking Technologies b.v.), the producer of Triplate® , is specialized in the manufacture of this ‘high tech’ transition joint.

SMT is approved as a manufacturer of aluminium/steel joints by Lloyd's Register of Shipping, Det Norske Veritas, Germanischer Lloyd, Bureau Veritas, American Bureau of Shipping and RINA.

Triplate® is most often used in shipbuilding, as a transition joint for welding an aluminium superstructure to a steel hull.

Transition joints for “welding aluminium to steel”

Product

Triplate® is a composition of three layers: steel, pure aluminium and sea water corrosion resistant aluminium.

These three layers are homogeneously bonded together in a vacuum environment, with the aid of explosives (explosion cladded, welded or plated).

Base material:Steel- LRA Shipplate Gr.Aor St 52-3N
Intermediate layer:Pure aluminium- Al 99,5(Alloy 1050A)
Surface layer:Corrosion resistant al.- AlMg4,5Mn(Alloy 5083)


Vacuum Explosive Cladding Technology

Triplate®

General

The vacuum-explosion welded transition joint, called Triplate® is a high quality material for welding aluminium to steel. Shockwave, the producer and supplier of Triplate® is specialized in the manufacture of this “high-tech” transition joint.

Approval of manufacturer:

Shockwave is approved as a manufacturer of Aluminium/Steel transition joints by Lloyd’s Register of Shipping and Det Norske Veritas.

Applications:

Triplate® is most often used as a transition joint in shipbuilding and offshore for welding an aluminium superstructure to a steel hull. In the offshore it’s quite common to weld aluminum living quarters to steel constructions by means of Triplate®.

Processing

Triplate® is easy to process and replaces the conventional nut-and-bolt connection, or rivet joints.

It is important that the temperature of TRIPLATE remains below the critical limit of 315°C during welding!

With reference to bending, use a standard minimum radius of 10 times the strip width or strip thickness

Triplate® dimensions:

Standard dimensions are available from stock. Custom made sections, such as special shapes cut by water-jetting, can also be supplied with short delivery times.

Strip width:Variable
Strip length:Maximum 3800 mm
Standard strip thickness:28 mm or 34 mm

Comparison:

atmospheric or vacuum cladding

Although atmospheric cladding is an effective process there appear to be advantages if the explosive bonding process is carried out under vacuum. Besides the fact that a vacuum process is much more quiet, its greatest advantage is that it’s not necessary to remove any air between the plates during the explosion.

For this reason less violent explosives can be used for bonding. This produces a smoother wave bond between the aluminium and steel which is often barely visible. A turbulent wave motion can trap oxides resulting in 'holes' being visible in the bond zone. These are in fact, undesirable agglomerations of oxides as shown in the illustration. If this product is subjected to the hammer bend test it can be seen that the fractures initiate at these points. Vacuum clad products do not have this problem. The table below shows the comparative properties of atmospheric and vacuum clad products.

Summary of differences:

Open air cladding

Vacuum cladding

Oxides with porosity

Oxides initiate fractures

Holes initiate corrosion

Stress relief treatment due to cold working

Variable weather conditions

Harder to machine (sawing and bending

100% dense

Does not apply

Does not apply

Not necessary since cold working is very limited

Does not apply since it is inside

Easy sawing and forming due to high ductility



Testing:

Triplate® meets the requirements of all the international standards, including the MIL-J-24445A, for Military applications.


 Shear strength base material - interlayer:

 > 55 N/mm2

 Bend test base material in compression

  acceptable

 Bend test base material in tension:

 acceptable

 Bend test base material in tension:

 acceptable

 Tensile strength (trough thickness):

 > 75 N/mm2

 Processing temperature:

 max. 315° C

Bend tests, shear test and tensile test of Triplate
Asymmetric tensile test
Tensile test of Triplate

Application

Triplate® can be produced in various strip widths. By means of water-jet cutting it’s also possible to produce special shapes to follow complex contours of superstructures. The pictures on the right show a typical piece produced by water-jet cutting. It is clear that the use of this technique will result in reduced manufacturing costs.

References

During the last few years SMT Metals has been very active in international markets and has been successful in supplyingTriplate® to a number of shipyards worldwide. For example, shipyards in Korea, the Netherlands, France, Philippines, Germany, Finland, South America and Norway; also the Fincantieri shipyard in Italy, where several kilometers of Triplate® strip have been used in the construction of famous cruise ships.

The largest passenger ship in the world, Queen Mary 2, recently completed by Chantier de l'Atlantique in Sainte Nazaire, with an enormous aluminium superstructure, used more than 3 kilometers of Triplate® strip plus some special Triplate® profiles produced by water-jet cutting.

Supplier

Transition joints have been mainly produced by the explosive weld-bonding process carried out in the open air in remote locations. This explosive process is in fact a cold pressure welding process, where investigations have shown that superior joint properties can be achieved if the process takes place under vacuum.

As this is very difficult to achieve in practice, at the present time only one manufacturer in the world has the capability to produce explosive clad products in a vacuum:

Shockwave Metalworking Technologies b.v. in Holland

Visit www.smt-holland.com for more information.

Shockwave Metalworking Technologies b.v.

Contact

SMT-Metals b.v. Mailing address:
Scherpenbergsebaan 49
4721 ST Schijf
The Netherlands
P.O. Box 50
4715 ZH Rucphen
The Netherlands
   

Phone: (+31) 165 343 451 
Fax: (+31) 165 343 589

Email: info@triplate.com